
Fireplace restoration for homes in Sunrise
Our family team restores neglected fireplaces with upfront pricing and a written record of the work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a neglected brick fireplace shows
- Fireplace unused for many years
- Debris or nesting in the firebox
- Broken or stained surround tiles
- Loose stones on a stone face
Jump to
Restoration work inside and around the firebox
Refilling open firebox joints
Open joints between firebricks let heat reach the masonry behind the lining. The building code limits how wide those joints may be and calls for a refractory mortar to fill them.
We clear loose material from the open joints and refill them with a heat-rated mortar, following the product instructions. Joints are kept tight and neat so the lining works as one surface. Where a joint has opened because a brick has moved, the brick is reset first. The finished joints are left to cure before any fire, as the mortar's instructions require.
The grate and where it sits
A grate lifts the burning wood clear of the firebox floor so air can feed the fire from underneath. A grate that is too large pushes the fire against the back wall. One that is too small leaves wood falling onto the floor.
We check the grate for size, condition and placement. A burned-out grate can be replaced with one that suits the firebox. For a factory-built unit, the grate must be the one its manufacturer specifies, since the listing covers it. The grate is a small line on the estimate, but it protects the repaired firebox.
A fireplace inherited from earlier owners
A fireplace in a house you have just bought has a past you did not witness. It may have been well kept, neglected or altered by earlier owners.
Ask for any manuals or records that came with the house. The free inspection tells you what type of fireplace you have and what condition it is in. If restoration is worth doing, we explain what it would involve. If only one repair is needed, we say so, and you can plan from there.
Easing back into use after restoration
The early fires after a restoration should be small. New firebox mortar may still be curing, and the damper and flue are being used again after a long gap.
Follow the curing steps we give you, using dry wood and a modest fire. Watch that smoke goes up the flue and that the damper stays fully open. If anything seems wrong, let the fire burn out and call us. Building up gradually protects the new work and shows you how the restored fireplace behaves.
What the free restoration inspection checks
- Firebrick replaced where units have failed
- Face brick cleaned by the gentlest method
- Mortar cure instructions before use
- Written record of the restoration work
Restoration answers for old fireplaces
Is restoration the same as remodeling a fireplace?
No. Restoration keeps the existing design and brings it back to working order. Changing the look, the materials or the layout is remodeling, which we do not offer. We tell you if a request falls outside restoration.
Will the new mortar match the old joints on the face?
We aim to match color, texture and joint shape. Face joints are repointed with a mortar no harder than the brick, following preservation guidance. The match is checked on a small area before the whole face is done.
Can you restore a factory-built fireplace as well?
Yes, within its listing. Panels, grates and other replacement parts have to come from that model's own parts list. The label on the unit gives the model and serial number we order by.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo