Restoring a neglected wood fireplace in Wynwood
We plan the whole fireplace at once, so each repair supports the next and the look stays true.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs of wear in an old fireplace in Wynwood
- Fireplace unused for many years
- Loose or missing firebrick
- Loose stones on a stone face
- Earlier repairs that keep failing
Jump to
What restoring a fireplace involves
One plan for a neglected fireplace
Restoration returns a neglected fireplace to safe use and to the look it was built with, under a single plan. It is the right approach when several parts need attention at once. Treating them one by one, months apart, often means later work damages earlier work.
We look at every part together, from the firebox and damper up to the smoke chamber, and down to the hearth and face. The plan then sets an order and a price for each item. You can approve all of it or part of it. Either way, each repair is chosen to fit the ones around it.
Cracks in the hearth
The hearth in front of the fireplace catches sparks, embers and dropped logs. Over time it can crack, lose grout or develop loose units.
We check whether the cracks are on the surface or run through the hearth. Surface cracks and open joints can be repaired and refilled. A crack that runs through, or a hearth that rocks, points to a support problem. We explain which applies and list the repair separately. Repairs are matched to the hearth material, whether brick, stone, tile or concrete, so the surface reads as one piece once the work is done.
Tile surrounds around the opening
Tile surrounds frame many fireplace openings. Heat and age can loosen tiles, crack glaze and open grout joints.
We reset loose tiles and replace broken ones with the closest match we can find. Grout is refilled in a material that suits the heat near the opening. If the original tile is no longer made, we explain the choices before removing anything. A tile surround is often the most visible part of a restoration, so we treat it with the same care as the brick.
Old fireplace restoration in the right order
An old fireplace often has several problems that built up over the years. Tackling them in the wrong order wastes effort, because later work can damage earlier work.
Old fireplace restoration starts with the parts that affect safety and draft, such as the firebox, damper and smoke chamber. The face and hearth come after, once smoke and debris from the upper work are done. We explain the sequence at the free inspection so you know what happens first and why.
What the restoration estimate covers
- Damper freed, repaired or replaced
- Damaged face brick replaced with matches
- Written record of the restoration work
- Workmanship warranty on the completed work
Your restoration questions, in plain terms
How long does a fireplace restoration take?
It depends on how many parts need work and on mortar curing times. We give you a sequence with the estimate. If the job runs over several days, the open flue is covered at the close of each work day.
When can I light a fire after the restoration?
Once the new mortar has dried and cured as its maker directs. Some heat-resistant mortars call for small fires before full use. We tell you how long to wait and how to build those early fires.
What records do I get after a restoration?
A written record of the work, listing what was repaired, replaced and retained, the materials used and anything left outside the scope. Keep it with any fireplace manuals for later maintenance visits.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo