Venting for gas fireplaces in Coral Springs, checked end to end
Vent repairs approved in the 72 hours after your free inspection are priced at 10% off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the gas fireplace vent is the suspect
- Nest or leaves at the outside cap
- Vent pipe loose where it meets the wall
- Water marks around the wall penetration
- Soot marks near the draft hood
Jump to
How we assess and repair gas vents
Leaks at a roof penetration
A vertical gas vent passes through the roof with flashing and a storm collar. One vent maker calls for a ring of nonhardening high-temperature sealant, such as silicone, around the pipe at the top of the storm collar to keep the roof watertight.
A ceiling stain near a vertical vent can mean the collar, sealant or flashing has failed. We check them where the roof can be reached safely and explain what we find. Vent-side repairs are quoted by us. If the roof covering around the flashing needs work, a roofer handles it.
Supply questions go to the gas contractor
The piping, meter and regulator that feed a gas fireplace are the business of the gas utility or a gas contractor. Vent work does not involve them, but a visit can turn up a supply question, such as a pressure reading outside the appliance's range.
We explain the finding and suggest the utility or a gas contractor look at it. The appliance may need to stay off until they do. Once the supply is confirmed, we complete any approved vent work and the operating check.
Ordering listed vent parts for a return visit
Vent parts belong to one system each, and ordering waits for your approval. Part numbers are checked against the vent maker's lists before the order goes in, and again on arrival.
If the fireplace must stay off in the meantime, we say so. When the parts arrive, we fit them, check the route and run the appliance. The return visit is recorded with the first, so the written record shows the full repair from finding to finish. If a supplier changes the expected date, we tell you.
Adapters between the appliance and the vent
Some appliances connect to their vent through a listed adapter or starter section, particularly when a different vent series is used. The fuel gas code allows fasteners through a double-wall vent only at certain transitions, such as from a flue collar to the vent.
We check that any adapter is the one the appliance manual lists for the vent series in use. Homemade transitions or adapters from another product are replaced with the listed part. The adapter's part number goes on the record, because it tells the next person which vent series the system uses.
Line items for gas vent work
- Vent maker and system read from labels
- Blockage from nests, plants or debris
- Supports, straps and wall bands
- Old parts and debris hauled away
Direct-vent and B-vent questions we hear
What usually blocks a gas fireplace termination?
Nests, leaves, plants and debris are the items owner's manuals ask you to look for. Later building work, such as a deck, fence, shed or enclosed porch, can also crowd a termination that once met its clearances.
Is vent repair part of a gas fireplace service visit?
No. A service visit includes a look at the termination, but repairs to the vent are quoted under this venting service. That keeps appliance work and vent work clearly separated on the estimate.
Can you check the vent without taking the fireplace apart?
Partly. Exposed pipe, the termination and the roof or wall exit can often be checked without opening the appliance. The collar connection and concealed joints may need panels or access opened, which we explain before doing it.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo