Fireplace hearth repair and replacement in Medley
A written record of the work notes what was replaced on the surface and what was done beneath it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth problems you can see and feel
- Loose stones on a raised hearth
- A split through a stone slab
- Scorch marks reaching the floor beyond
- Rug or laminate covering part of the hearth
Jump to
Hearth Repair for fireplaces in Medley
Nothing combustible may remain under the hearth
The code says combustible material must not remain against the underside of a hearth or hearth extension once it is built. Brick industry guidance adds that wooden forms used to cast or support the extension must be removed when construction is complete.
Occasionally a hearth was built over wood that was never taken out. From above it looks normal, but the wood can dry, char or rot over time. If sagging, cracks along a straight line or other clues suggest it, we explain what opening a small section would show and price that as a separate step.
When the hearth extension is too small
The code sets how far a hearth extension must reach in front of and beside a masonry fireplace opening, with a larger extension for a larger opening. A factory-built fireplace follows the size in its listing. Some hearths fall short, often after a renovation trimmed them back.
If the extension in front of your fireplace looks small for the opening, we check it against the rules for that fireplace. Extending it is a repair in its own right. We explain the options and what each involves, including how the new section meets the existing hearth and floor.
Replacing damaged hearth bricks
A chipped or cracked hearth brick can usually be cut out and replaced without disturbing its neighboring units. The joints around it are removed, the brick broken out and the bed cleaned before a new unit is set.
Matching size, color and texture takes some searching with older brick. We discuss the likely match before starting. Where a brick has cracked because the base below moved, we deal with the base first, so the new brick does not crack along the same line.
Patching part of the hearth or renewing the surface
A patch suits a hearth where the damage is local and the base is sound. A full resurface suits one where damage is widespread, the base has failed across the area or matching is impossible.
We explain which the evidence supports and price both where both are reasonable. A full resurface costs more but resets the whole surface at once. A patch keeps the original finish where it is still sound. The choice is yours once the trade-offs are clear. We write down whichever route you pick, so its limits are clear later.
What the free hearth inspection looks at
- Edge pieces and trims inspected
- Sealed joint between the unit and hearth
- Old hearth material hauled away
- Usable spares left with you on request
Worth knowing before a hearth repair
How long after a hearth repair can we light a fire?
The setting materials decide that, and each product's directions differ. We tell you when the hearth can be walked on, when heavy items can go back and when fires can resume. The written record notes any curing steps still running.
What if wood was left under my hearth when it was built?
The code says combustible material must not remain against the underside of a hearth. If the signs suggest it, we explain what opening a small section would show and price that step first. Any wood found is removed as part of the repair you approve.
Are hairline cracks in a concrete hearth a concern?
Fine shrinkage cracks are common in concrete and are often stable. Cracks that widen, step or come with a loose or dropped edge are different, and they point to the base or support. We check which kind you have before suggesting any work.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo