Breathable waterproofing for chimney brick in Roosevelt Gardens
Application waits for dry weather within the product's limits, and the date moves when conditions fall short.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Marks of water soaking into chimney brick
- Damp patch on the chimney breast indoors
- Brick grit collecting on the roof below
- Rust stains running down the brick
- Runoff streaks below the cap
Jump to
Keeping rain from soaking into chimney brick
New mortar and the waiting period
After repointing or brick replacement, new mortar needs time before a repellent goes over it. Product data sets the conditions, and new work often has to be cleaned before treatment. Treating too early can reduce the result.
Brick industry guidance also suggests waiting after repairs to see whether the water problem has already been solved. Sometimes it has, and treatment becomes optional. We explain the timing for your chimney and schedule the treatment as a separate step, so it does not get rushed onto fresh work.
How the repellent goes on
Product data sets the application method. For many penetrating repellents, that means a low-pressure spray that wets the masonry without turning the product into mist. Some call for the surface to be flooded and a second pass applied while the first is still wet.
Small areas may be done by brush or roller when the product allows it. We follow the method in the data sheet for the product we name, using the same method on the test area. The written record notes how the product was applied.
Patches that take treatment differently
A chimney that has been repaired over the years carries brick and mortar of different ages and makes. Replacement brick may be denser or more porous than the original. Newer mortar may absorb differently from older joints.
Those differences can show after treatment, with some areas darkening more or shedding water differently. The test area should include patched sections as well as original ones. We point out the patches during the inspection and explain what to expect on each. If a patch is failing, its repair comes before the treatment.
Damp on the chimney breast indoors
A damp or stained chimney breast inside the house has three likely causes. Water may be soaking through the faces, leaking in at the top or roof line, or forming inside the flue. Each needs a different answer.
We look at which it is before recommending treatment. Absorption through the faces tends to show after long rain and fade slowly. A leak tends to show soon after rain. Moisture from inside may appear in dry weather. The findings explain which pattern fits your chimney.
Written into a waterproofing proposal
- Earlier coatings or paint identified
- Test area including patched sections
- Glass and skylights masked
- Written record of product and faces treated
What people ask before sealing a chimney
What happens if it rains on the application day?
Product data sets a rain-free period after application, along with temperature and wind limits. We plan for a dry window and move the date if the forecast turns. If rain arrives unexpectedly, we tell you what was affected and whether any area needs another pass.
Is there a charge for the waterproofing inspection?
No. The inspection and the written estimate that follows are free. You pay only for work you approve, at the figure in the estimate. Any change after a test area comes to you as a separate item before it goes ahead.
Can I apply a chimney sealer from a hardware store myself?
You can, but read the product data first. Some store products form films that trap moisture, and every product needs repairs done beforehand and glass and plants protected. Working at height on a roof is the other risk. The free inspection tells you what the chimney needs either way.
More Ways to Care for Your Fireplace
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo