Firebox joints and bricks repaired in Brickell Key
We protect the room, contain the dust and haul the old brick and mortar away when the firebox is done.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Warning signs inside the firebox
- Open joints between firebricks
- Backing masonry showing through a gap
- Corner joints opening
- Spalled units above grate height
Jump to
Firebox repair from lining to curing
Firebox work near the lintel over the opening
The lintel over the fireplace opening bears on the masonry at each side. Rebuilding the side walls near the opening has to leave that bearing sound. Side walls and the lintel ends sit close together, and one can disturb the other if the work is not planned.
We plan side-wall work so the lintel stays supported throughout, and check its ends for rust or movement while the area is open. If the lintel itself needs attention, that becomes a separate item on the estimate with its own explanation. Where the lintel is sound, the new side walls are built to bear it exactly as the old ones did.
The top courses just below the damper
The highest courses of the firebox sit just under the throat and the damper. They take rising heat, any water that runs past the damper, and the weight of what sits above. Loose units here can affect how the damper seats.
We check those courses closely, often with the damper open and a light. Repairs at the top of the firebox are planned with the damper in mind, so its frame stays supported and its plate still closes. Any damper repair that follows appears as a separate item.
Repointing firebox joints in Brickell Key
Open or crumbling firebox joints in Brickell Key fireplaces are raked back to sound mortar and refilled with refractory mortar in thin, consistent joints. Deep voids are built up in layers. Firebox joints are narrow by design, and the repaired ones stay that way.
We tell you which joints are included, wall by wall, and which product we will use. The curing steps are explained before we leave. If joint loss points to a cause such as water or closed glass screens, we explain that too. Where only a few joints have failed, the repair stays local and the rest of the lining is left alone.
Firebrick in factory-built units in Brickell Key
In Brickell Key homes, certain factory-built wood fireplaces use the maker's firebrick rather than panels. We read the label and the manual, then order the listed firebrick for that model. Those bricks are part of the unit's listing, so generic firebrick is not a substitute.
Replacement bricks go back in the positions the manual shows, set the way it describes. If the unit uses panels instead, we route the job to our prefab fireplace repair service and explain why. Where the maker no longer supplies the brick, we tell you before any work begins and explain the options.
Materials and steps in a firebrick repair
- Medium-duty refractory mortar named
- Room and hearth protection
- Damper or leak items listed separately
- Workmanship warranty on the repair
Before you book a firebox repair
Do you repair the floor inside the firebox?
Yes. The floor inside the opening is part of the firebox and takes heavy wear from grates, logs and tools. Loose or cracked floor units are reset or replaced in refractory mortar, and the grate is checked at the same time.
What happens to the damper during a firebox rebuild?
The damper frame often rests on the top of the firebox walls, so a rebuild near the top keeps it supported and resets it in its bed. If the damper plate itself is damaged, that repair is listed separately.
Do factory-built fireplaces ever use firebrick?
Some factory-built wood units are lined with the maker's firebrick, placed as the manual shows. Replacements come from the maker's parts list for that model. Others use panels, which go to our prefab repair service.
More Ways to Care for Your Fireplace
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo