Loose and cracked hearths repaired in Hillsboro Pines
Loose edges and lifted tiles are made safe underfoot, with setting times explained before the fireplace is used.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs your hearth in Hillsboro Pines needs attention
- A tile that sounds hollow underfoot
- Cracks running across several tiles
- Tiles lifting at their corners
- A raised hearth that flexes when sat on
Jump to
Hearth repair from the surface down
The screen and the hearth work as a pair
A screen that closes across the opening keeps most sparks on the firebox side. The hearth takes whatever gets past. If one is failing, the other has more to do.
During a hearth visit we check that the screen closes fully and sits on the hearth without gaps. A torn or sagging screen is noted even though it is not hearth work. Keeping both in order reduces the marks and wear on the repaired hearth afterwards. A screen that leaves a gap at the base lets embers straight onto the hearth edge.
Opening a small section to check the support
Sometimes the surest way to learn why a hearth keeps cracking is to lift part of it. Taking up a few tiles or a small area of brick shows the bed, the base and sometimes the support itself.
We choose the spot that will tell us the most with the least disturbance. The opening is protected while it is open and made good afterwards, or folded into the repair if you go ahead. The cost of that step is shown on its own line before we begin.
The first fires after a hearth repair
Once the setting time has passed, start with a modest fire and keep the screen closed. Watch the repaired area during the first few fires for any movement or cracking.
Fresh grout and mortar near the opening take the most heat, and small changes are easier to deal with early. If something looks wrong, stop and tell us. The workmanship warranty covers the repair, and we would rather check a small concern than leave it to grow. Grout near the opening may darken quickly, which is normal and not a sign of failure.
Arranging hearth repair in Hillsboro Pines
A call about a hearth in Hillsboro Pines starts with what you have seen and what the hearth is made of. We book a free inspection at a time that suits you. If the fireplace is factory-built, mention the model when you know it.
On the visit, we check the surface, the edges, the base where we can and the size against the fireplace. A free written estimate then sets out the repair, the materials and any matching options. Nothing starts until you approve it, and the finished repair comes with a written record listing materials and setting times.
What hearth work in Hillsboro Pines includes
- Hearth type and finish identified
- Hearth size checked against the opening
- Support type identified where visible
- Base condition beneath the finish
Hearth repair in Hillsboro Pines, your questions
Can you replace a single cracked hearth tile?
Often, if the base under it is sound and a matching tile can be found. We tap the surrounding tiles first. A line of cracks or hollow areas nearby points to the base, and then a single new tile would crack again.
Is the floor inside the firebox part of hearth repair?
No. The floor where the fire burns is the inner hearth, repaired with firebrick and refractory mortar as firebox work. The hearth extension in front of the opening is repaired with finish materials on its base. We list each on its own line.
Can a rug sit on top of the hearth?
The hearth extension is meant to stay clear and noncombustible across its whole area. A rug over it sits exactly where embers land. Keep rugs off the hearth and back from its edge, and move them before our visit so we can see the whole surface.
More Ways to Care for Your Fireplace
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo